One year later and someone moved the project, sadly some of the wires fell out. So here is how to fix it when this happens again. Rewire the LCD The display has 4 outlets. The white on the image is physical pin 19 which we are going to connect indirectly to the Lcd pin marked The full story here…
Category: Electronics
Pico Temperature Sensor
My advent calendar didn’t have chocolate this year. Instead it had a Pico and lots of LEDs. Thanks to The Pi Hut for a very enjoyable project, and for the extensive guides which help a person get up and running with the Pico. All the code – micropython – in this post is provided by The full story here…
Raspberry Pi to ESP32
A backcopy of Hackspace showed how to use the Raspberry Pi to an ESP 32, in order to control it via Python. Unfortunately the article was too old and the build command didn’t work. Rather than try and unpick the thing, I went to find a newer, working tutorial.
Connected Little Sandwich Box – Button
Added a button so that I can make the box do something. On the WEMOS the button sits between D5 and D0 – they are adjacent pins.
Connected Little Sandwich Box – Communication
We have two connected little boxes which we want to talk to each other. Connect them in turn to the computer. Use the Arduino ide. Launch the serial monitor, and make sure it is 115200 baud Type dump mqtt. Copy each line that needs changing, and add the value to the end. Enter the completed The full story here…
Connected Little Sandwich Box – Construction
In the April 2021 Hackspace there is an article for Connected Little Boxes. The author assured me it was simple to make, so I decided to give it a go. Our 3D printer never did work, so decided to use a round sandwich box, which would fit the NeoPixel ring quite nicely.
Fix the Kitchen Scale
Our scale was not very expensive, we have had it for over a decade, and we could probably replace it at very small expense. But that is not the point, is it.
Led Mask
I saw a post last year from Tyler Glaiel on Medium, and decided to copy his idea and make a mask.
Robots in the Snow
There is no point really – except this site is called Snersbots. We hardly get any snow in our part of the world, so when we heard the forecast, we quickly put in for some time off work.
Soldering practice
I decided I needed to improve my soldering. As always, I went onto my favourite shopping sites (not Amazon – Amazon is the man) and sorted by price.